1 / 6
Pokeball/Premier ball Piggy Bank — zdjęcie 1
1 / 6

Pokeball/Premier ball Piggy Bank

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy to print and assemble pokeball shaped piggy bank

Ocena
4,944 / 5
Polubienia
390
Pobrania
1677
Wydruki
19
Wyświetlenia
7096
Oceny
18

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This idea was inspired by Flowalistik's Low-poly pokemon piggy bank which, you can see here: https://www.printables.com/model/234542-low-poly-pikachu-piggy-bank

I wanted to make sure it was printable without supports for ease of printing. You will have to glue the pieces together. I may redesign it to assemble without glue in a future revision. This prints about 4" in diameter, but you should be ok scaling up if you want. 

Side note: this could also be used to make a Premier ball if you printed in white and red instead. (Added pictures of one) 

Check out my other 3 versions! Greatball, Ultraball, and Masterball.

UPDATE: updated top and middle piece to make future variations easier to print in a different orientation.

If you'd like to help me out or have permission to sell physical items from my designs, please join my club!

Recommended print settings:

  • 0.2mm layer height 
  • Slower speed for first 6-7mm for bottom piece
  • 3 perimeters
  • 10% infill 
  • NO SUPPORTS NEEDED but if you're struggling on the top/bottom it may help

Tagi