1 / 2
Kotto Soldering Fume extractor 125x100mm intake — zdjęcie 1
1 / 2

Kotto Soldering Fume extractor 125x100mm intake

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replace the stock 100x55mm intake with a more effective, larger and quieter intake.

Ocena
5 / 5
Polubienia
10
Pobrania
55
Wydruki
2
Wyświetlenia
764
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is an improved design with smoother intake ramp and despite being slightly smaler, is much more effective. It is however harder to print and does need supports.

I found the stock 100x55mm Kotto intake to be noisy (made a whistling noise) and not very effective. So I designed a 125x100mm Intake which makes a huge improvement to the system, both in performance and noise.

PS, It is an intentionally tight fit to the flexible duct.

Kotto Soldering Fume Extractor

Tagi