[OLD] 1/8th 1/10th offroad RC shock stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I went from 1/10th to 1/8th buggy racing.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 299
- Wydruki
- 2
- Wyświetlenia
- 1939
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE jan, 1st 2024:
I made a much better Shock Stand:
You might want to try this one in stead:
https://www.printables.com/model/694740-updated-18th-110th-offroad-rc-shock-stand
***********************************
I went from 1/10th to 1/8th buggy racing. Some of my 1/10th-gear wouldn't fit obviously, .. so I designed some new stuff.
This is a shock stand for the bigger 1/8th shocks.
The design is very simple, but is easy to print, stable and can be disassembled for easy transport.
After that, I designed another base for this stand so that I can use it for 1/10th shocks as well.
Print instructions
I print most of my stuff with Prusament PETG as I like the fact that this will break less then PLA and is more resistent to temperature.
... but I guess PLA will do fina also.
The parts fit nicely together if your printer is well tuned (0.1mm gap).
If you have a less tuned printer, I think that a little dab with some sandpaper or file will do the trick also.