Holder for M10 rodbar (Prusa i3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In the past I used this item (designed by michielh) in my first 3D printer, a prusa 2 with m8 rodbars.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
In the past I used this item (designed by michielh) in my first 3D printer, a prusa 2 with m8 rodbars.
In my second printer, a prusa 3, I've need to hold the Arduino&Ramps. Also I've need a toolholder. And I want all in the front of the unit, near the LCD. So, I've decided to scale up the ramps holder to fit it in a M10 rodbar. I use repetier and increase scale in a 10%. In my test the new holder dont need screws or bolts to hold tighly in m10 rodbar.
In the pictures you could see the final result. I'm very satisfied, the printer looks very well
Print instructions
Category: 3D Printer Accessories Summary
In the past I used this item (designed by michielh) in my first 3D printer, a prusa 2 with m8 rodbars.
In my second printer, a prusa 3, I've need to hold the Arduino&Ramps. Also I've need a toolholder. And I want all in the front of the unit, near the LCD. So, I've decided to scale up the ramps holder to fit it in a M10 rodbar. I use repetier and increase scale in a 10%. In my test the new holder dont need screws or bolts to hold tighly in m10 rodbar.
In the pictures you could see the final result. I'm very satisfied, the printer looks very well