Box for Gin bottle (or other) vase-mode

I designed this box to use as a present wrap around a bottle of Gin to offer my brother. It features a square profile and ribbed sides for esthetic and strength. The dimension of the bottle it is intended for are: Diameter=83mm, Height=206mm. This is rather common for Gin. However, the design is almost entirely parameterized, you should be able to modify it to accommodate other bottles.

The lid at the top, is printed in normal mode. It can be personalized with text, e.g: name. You will find 2 STL files for the lid:

• Top-lid-v6_notag.stl, blank lid
• Top-lid-v6_gintag.stl, lid with “GIN” written on it

Print setting:

Box

• Spiral Vase Enable (a.k.a Vase-mode)
• Layer height = 0.10mm (or smaller), because of the rather steep overhangs of the rib's fillet
• Exclusion width / External perimeters = 0.6mm, works with 0.4mm nozzles, quality is not affected, make for a much more rigidity and helps the overhangs
• Horizontal shell / Bottom = 2mm (20 layers), no Top shell

Lid

• Normal printing mode (Spiral Vase Disable)
• Layer height = 0.20mm (this can be change for bigger or smaller without issue)
• Infill 15% (although in practice it is near 100% anyway)
• Infill / Bridge orientation = 45°, if you have a text on the lid, or rotate the part on the print bed

My box was printed with Prusament PLA Galaxy Black, the box took about 12h to print and the lid about 1h30min.

Customization

This project was made with onshape, you can find and customized it here: impulse1delta / SquareBox_SpiritBottle_ d83_h206 | onshape.com