1 / 4
Trailer Hitch for Bruder Vehicles (Anhängerkupplung)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spare trailer hitch module for Bruder vehicles
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 706
- Wydruki
- 3
- Wyświetlenia
- 2529
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (1)Kolekcje (88)Powiązane
My son lost the trailer hitch (Anhängerkupplung) for his Bruder Wheel Loader.
I took some measures and had a look at some images from the official replacement parts and designed this one in Fusion 360.
There are two versions:
- One with the pin printed.
The pin is obviously the weakest part of the print. - One with a hole for a M3 screw.
You may have to sand down the screw head to make it small enough for the trailer.
This version should be way stronger than the one with the printed pin.
I printed the parts in PLA and ABS, both work fine.
Prints fine in “normal” upright standing orientation.