EK Archery Vlad automatic safety toggle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple addon to automatically disable the safety while reloading.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 862
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
This automatically pushes the safety switch forward so you can directly shoot after reloading with your vlad.
The switch is toggleable, so you can always disable it and enable the safety switch again.
Print with atleast 20% infill in any resolution.
You need 2 m3 screws, 2 nuts and some double sided tape.
Simply print both parts, attach the screws and then apply the tape to your printed part. Cut out the part behind the moving nut so it doesn't stick to the tape.
Remove the other side of the of the tape and attach on the ride side of your vlad, making sure that it actually pushes the safety forward in it's down position.
Please note: the uploaded files already have the correct scaling (atleast for me) and don't require cardboard anymore like in the preview picture :P
Based on a concept by itryit 32