1 / 2
eSUN eBox Filament Dryer Replacement Gasket (1.75mm / 4.00mm Bowden Tube)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable gasket / guide for the eSun eBox filament dryer, using 4.0mm diameter bowden tubes versus the larger tube.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 698
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
This model is those who run a larger printer where the included bowden tube may not be long enough (and too large of a diameter), or just would like to directly attach their dryer feed to their extruder. (This prevents filament from snagging and under-extruding.)
For use with the eSUN eBox (https://amzn.to/3PWFcIs), and with a 4.0mm diameter bowden tube (https://amzn.to/3jqnAbH). (Affiliate links!)
Print with TPU 95A. Have the nozzle end face the bed, as shown in the picture.