Christmas Tree Bobble
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added a simple spring to the original model, which lets the feet dangle and the tree bobble a little.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 791
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I added a simple spring to the original model, which lets the feet dangle and the tree bobble a little. Just a small upgrade to an already nice model.
Not much supports are needed, the Christmas tree might need a little at the base because of the of the space created for the spring. I would also put supports on the bottom of the shoes, since they're slightly rounded, it'll help make the print more stable.
Its an easy enough build, after printing the pieces you can place the spring in the Christmas tree and the feet into the spring attachment pole. Depending on the material used the pole might need to be sanded a tiny bit to fit just right.