Cute crabfishing gear - MMU2S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Testing my MMU2S and had to give it a light challenge.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Testing my MMU2S and had to give it a light challenge. My son needed a crabfish gear for last schoolday - why not make our own :D
You need a Prusa MMU2S multimaterial printer for this. Either use the prusaslicer 3mf file or take the stl - it needs to be split to parts when imported to your slicer.
Printed in PETG - 0.2mm
Imaged ripped from the net - created dxf in Inkscape - tweaked in Onshape and sliced with PrusaSlicer.
If you use the stl file you need to rescale it to your liking. Printed upside down on powder steel sheet to get that beautiful finish.
Print instructions
Category: Sport & Outdoors Summary
Testing my MMU2S and had to give it a light challenge. My son needed a crabfish gear for last schoolday - why not make our own :D
You need a Prusa MMU2S multimaterial printer for this. Either use the prusaslicer 3mf file or take the stl - it needs to be split to parts when imported to your slicer.
Printed in PETG - 0.2mm
Imaged ripped from the net - created dxf in Inkscape - tweaked in Onshape and sliced with PrusaSlicer.
If you use the stl file you need to rescale it to your liking. Printed upside down on powder steel sheet to get that beautiful finish.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3 MMU 2
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15%
Filament: Prusa/Claes Ohlson PETG Orange, Black, White
Notes:
Print in PETG to get a sturdy and somewhat flexible piece.