Minidisc angled storage case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled minidisc storage case (inspired by 60s/70s eggs chairs)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my own design that I'm copying over from Thingiverse here. (Created account here because I've been finding Thingiverse buggy).
This is a storage case that can hold 10 minidiscs without sleeves.
It has some overhangs less than 45 degrees, so may be tricky to print.
I printed this without any support, and it works fine, but has a rough surface on the two edges that overhang.
Still perfectly functional.
I've uploaded the Fusion 360 file in case anyone wants to modify it.
Please share any modifications you make.
Print Settings
Printer brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
0.18mm
Infill:
20%
Filament brand:
Polymaker
Filament color:
Lulzbot Green
Filament material:
PolyLite PLA
Notes:
Took 11.5 hours with 0.5mm nozzle