1 / 2
Frozen food labeling Nirvana - magnetic mount for painter's masking tape
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The best way to write the contents of the storage bags/boxes/etc.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 1064
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (1)Kolekcje (84)Powiązane
The best way to write the contents of the storage bags/boxes/etc. you put to your freezer is to use the thinnest painter's masking tape - they will stick and hold properly in the -18 ℃ environment.
The STL was generated to hold 2 pcs of 20x10x5 mm neodymium magnets inside. I would upload the parametric Fusion 360 design which let you customize the magnet dimensions but unfortunately, this site does not allow .f3d files.