1 / 7
Bike Mount - iPhone 14 Pro Max
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed version of the bike mount.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 2307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
Remix of a phone mount by Legufix. Updates/changes include:
- Re-size and Re-design to fit an iPhone14 Pro Max with a case
- case is a RhinoShield SolidSuit if anyone is wondering
- Special attention paid to the cut outs for the buttons, speakers and charging/headphone port, as well as the camera bulge on the rear.
- Re-design of the base/mounting structure.
- My bike has a built in SP-Connect mount on the handle bars. I re-designed the back to be flat, so that I could attach a universal SP-Connector.
- Removed the threads from the lower part's bolt hole and resized for an M5 heat-set threaded insert.
These changes along with the print settings I used (see below) make this robust enough to attach to my road bike and cycle outdoors in confidence.
Print Settings:
- 0.2mm layer height
- 0.6mm line width
- 3 walls, 4 top/bottom layers
- 25% infill
Hope you like it and hope someone can use it.
Thanks,
Sean