Broom Handle Mountable Reindeer Hoof Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It uses a wooden broom handle. Either use the hoof print on it's own, or utilize both parts to mount on a broom.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
This is a reversible reindeer footprint making device. Use 3mm bolts to mount the wooden broom handle to the top in either forward or reverse direction depending on the orientation you wish. There is a screw hole for a wood screw on the broom mount. The broom handle I have is tapered, so the mount is as well. It shouldn't be tough to create your own if yours is different.
I am using it to make footprints in the snow on the roof of the house and on the lawn beside some carrots.
I am a bit new to modeling. The 3mm holes are a little bit tight but I was able to get them through with a tiny bit of resistance.