Cable channel for Yet Another Cable Clip (YACC)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small cable channel that slots into the YACC cable clips by McMatt (https://www.printables.com/model/15228)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A part I made for my current printer project. Simply slots underneath the cable clips designed by McMatt https://www.printables.com/model/15228-yacc-yet-another-cable-clip-for-openbuilds-v-slot
Specifically the "cableclip_10mm_xl.stl" variant - poke one end into the clip after running the cables to keep them contained inside neat and tidy. The tab is half the depth of the clip, so two will fit in end-to-end under each clip. It doesn't have a ton of room inside due to the constriction that leads into the clip, but it will manage what I put into it, and maybe in the future I'll make an extendo variant with bigger capacity.
Might require some fussing with tolerances to ensure a snug fit. Some of mine I printed came out a bit loose and fall out of the clips easily - you could also put a bit of electrical tape or similar over the sections that insert for more friction, which is something I just thought of while writing this and need to try.
Model provided in printing orientation. I printed mine in PETG but it's never under much load so most materials should be fine!