Parrot disco m4 screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer!
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 208
- Wydruki
- 0
- Wyświetlenia
- 892
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I used a customizer tool with the below settings form thingyverse to create screws to use on my parrot disco - these will shear off in a crash, rather than ripping out of the disco's foam and create more damage to the plane - sort of shear pins . I have broken a few already ;)
Category:
Instructions
Using the following options:
type = bolt
head_type = button
drive_type = phillips
head_diameter = 8
head_height = 3
drive_diameter = 5
slot_width = 1
slot_depth = 2
texture = exclude
thread_outer_diameter = 4
thread_step = 0.7
step_shape_degrees = 45
thread_length = 25
countersink = 2
non_thread_length = 0
non_thread_diameter = 0
nut_type = normal
nut_diameter = 12
nut_height = 6
nut_thread_outer_diameter = 9
nut_thread_step = 2
nut_step_shape_degrees = 45
wing_ratio = 1
inner_diameter = 8
outer_diameter = 14
thickness = 2
facets = 6
socket_facets = 6
socket_depth = 3.5
resolution = 0.5