1 / 2
AA and AAA Battery Holder (for Honeycomb Storage Wall)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combo AA and AAA battery holder for the Honeycomb Storage Wall system.
- Ocena
- 4,71 / 5
- Polubienia
- 544
- Pobrania
- 2357
- Wydruki
- 38
- Wyświetlenia
- 8808
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 38) (Komentarze: 45)Remiksy (2)Kolekcje (922)Powiązane
Combo AA and AAA battery holder for the Honeycomb Storage Wall system.
The holder is printed in two pieces, and put together using friction-fit. It might take a bit of force, but do it using gentle percussive persuasion, rather than hammering at it, to avoid breaking the joining-fingers.
Attach using countersunk M3 screws to two HSW M3-inserts, for using on the wall.
Recommend printing using at least 3 perimeters.