Naze32 Casing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my take of the Naze32 case. I try to make it as light weight as possible.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Here is my take of the Naze32 case. I try to make it as light weight as possible.
Print instructions
Print a copy of Case_Lower.stl
If your 6x3 way and 3x2 way pins are horizonal (ie. 90 degree pins) , print Case_Upper_H_Pins.stl
If your 6x3 way and 3x2 way pins are vertical (ie. straight pins) , print Case_Upper_V_Pins.stl
If your 6x3 way pins are vertial and 3x2 way pin are horizonal then print Case_Upper_H1_V2_Pins.stl
Shape the screw holes of the upper case with a 3mm drill bit
Shape the screw hole of the lower case with a 2.5mm drill bit then tape the holes with a M3x0.5 Tap.
Put your naze32 flight controller inside and screw them together with nylon M3 x 12 countersunk machined screws. Of course you can use metal screws if you don't have nylon ones.