Clock Face Rolex Submariner style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clock Face similar Rolex Submariner for Quartz Clock Movement Mechanism. For 8mm shaft. Diameter 160mm
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 285
- Wydruki
- 1
- Wyświetlenia
- 1618
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a clock face inspired by the Rolex Submariner. Diameter of the face is 160mm. The hole is designed for 8mm shafts.
I didn't add the Rolex crone or lettering to not violate copyrights, but with a little research in the WWW and a little creativity in the slicer you may be able to make modifications according your preferences.
Accessories:
Print instructions:
There are no specials to consider.
Color-change for the last two layers (if you remain on the pre-sliced 0,1mm layer heights settings in the 3mf file).
Hints:
Use fluorescing filament for the face
It is worth a try to use a 0,25mm nozzle, especially if are adding own logos or lettering's. But print time will increase to 10h+.
Version: 1.1 - 25. Dec. 2022 / Slicer: PrusaSlicer Version 2.5.0