Hour and Minute Hands Rolex Submariner style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hour and Minute Hands similar Rolex Submariner for Quartz Clock Movement Mechanism.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 375
- Wydruki
- 0
- Wyświetlenia
- 1425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are clock-hands inspired by the Rolex Submariner, suitable for my Clock Face Rolex Submariner style.
Hour hand:
Length: 69mm, designed for a 5mm shaft.
Minute hand:
Length: 43mm designed for a 3mm shaft.
The shaft diameter are (as far as I know) the most common shafts on Quartz Clock Movement Mechanisms, but there might be different sizes.
Print instructions:
I recommend a 0.25 Nozzle, but a 0,4 nozzle might work, too (never tried).
Keep in mind, that the hands are skeletal shape, so not much surface on the printer sheet.
Therefore:
Make sure that your printer sheet is perfectly cleaned, and you have a well calibrated printer, with a flawless calibrated fist layer.
Brim might be an option, but consider the post-work.
The material shrinkage is more than usual. Not a big thing for the hands itself, but for the shaft holes. You might enlarge the holes by drilling to the fitting size again (I have tried to adapt this to the design, but there are a lot of possible influences which changes the results like printer speed, one or more sets, used material brand, … it is almost impossible to find the perfect dimension in the CAD file).
Accessories:
Version: 1.3 - 25. Dec. 2022 / Slicer: PrusaSlicer Version 2.5.0