Kossel Magetic Effector for E3D V6 Volcano
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an Effector for delta printers that are using magnetic rods AND that also are using V6 hotend with the Volcano…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an Effector for delta printers that are using magnetic rods AND that also are using V6 hotend with the Volcano block.
Can be used with:
- Original Kossel Z Probe
- BLTouch Sensor
In both cases you have to download its corresponding files.
Now it has two layer fans support
All pieces have been printed with PETG
The magnets I have used are IØ : 4mm , OØ12mm and a thickness of 4mm. I strongly recommend you to stick them steadly. Link: https://es.aliexpress.com/item/32891959770.htmlspm=a2g0s.9042311.0.0.48c063c0gBxYrn
Original design of the cage and effector: https://www.thingiverse.com/thing:2861727
You can find the magnetic carriages used of this assembly on that link
Assembly not tested during printing yet. Any feedback is apreciated.
Category: 3D Printer Parts