ROOK [MK1] [2020] [LEGACY] Side-mounted spool and Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a side-mount for a spool and the extruder.
- Ocena
- 4,875 / 5
- Polubienia
- 20
- Pobrania
- 206
- Wydruki
- 8
- Wyświetlenia
- 934
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Made a side-mount for a spool and the extruder.
Spool-mount uses the 8mm rod and one M5 screw, extruder uses one of the M3 screws from the rail and a nut and one screw you need get creative with.
Can be mirrored in the slicer for left hand side mount.
EDIT:
Added a V3 model where the arm does not need to be screwed on, just clips on.
EDIT:
Added a V4 that wont require you to remove the Rod to install, also added space for a PTFE-tube on the hanger for smooter use.
EDIT:
Added a Mount for the rook 2020!
EDIT:
Added a small PTFE holder to put on the back, works on both MK1 and 2020.