OctoPi Sleeve Case for FFCP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fatter sleeve case so it's easier to get the camera cable hooked up, an OctoPrint logo, and a stand that hooks onto…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Fatter sleeve case so it's easier to get the camera cable hooked up, an OctoPrint logo, and a stand that hooks onto the top of the FlashForge Creator Pro frame.
OctoPrint logo by Janina Himmen see http://octoprint.org
Lithopane by http://3dp.rocks
Instructions
Mine was printed in ABS and the friction fit for the case is just about right. In PLA, you might have to scale it slightly (1%) in X coordinate for it to fit, I haven't tried it yet. I'd suggest printing the first few mm of layers and check.
Category: 3D Printer Accessories