stackable box feet and feet receivers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built a bunch of modular audio gear boxes for rackmount equipment.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 264
- Wydruki
- 0
- Wyświetlenia
- 2226
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
I built a bunch of modular audio gear boxes for rackmount equipment. I designed these feet and "feet receivers" to be installed on the boxes so they would stack securely.
You'll find the files for the feet, receivers for the top of your box, and an installation jig so they're all installed with correct spacing.
UPDATE: I made a slightly lower profile version that reduces the height by about 1/4 - 3/8" (two stacked boxes were just shy of fitting inside my truck bed with the lid down). The files are cone-v4 and cone-receiver-v6.stl
Print instructions
no supports needed