Insta360 One R - Rode Wireless Go - Invisible Mounting Cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vertical cage mount for the Rode Wireless Go microphone system.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 1266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A vertical cage mount for the Rode Wireless Go microphone system. This should make your system invisible to the Insta360 One R video camera. You'll need to hide the wire over the top, and also tape the side-door out of the way. Below are the links to the non-printable items.
https://www.amazon.com/gp/product/B077P9GSRT/
https://www.amazon.com/gp/product/B00HPAPFNU/
Good luck! ^_^
UPDATE: You are required to use TPU filament, or this will not work.
Print instructions
Sainsmart TPU
0.6mm Nozzle
0.35 Layer Height
230°C Nozzle
60°C Bed
Use a soldering iron at 400°F to set the threads.
BE CAREFUL, it will burn you instantly!
NOTE!!!
Under no circumstance should you use pre-generated .gcode files, it is extremely risky and could damage your printer. Always slice the files yourself.