Elegoo Neptune 3 Pro filament detector mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement filament detector mount that replaces the spool holder.
- Ocena
- 5 / 5
- Polubienia
- 149
- Pobrania
- 935
- Wydruki
- 8
- Wyświetlenia
- 6814
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This part replaces the spool holder on the Elegoo Neptune 3 Pro.
The Neptune 3 Pro has a large spool holder that increases the height of the printer. I use a filament dryer on a bookshelf above my printer so the built-in spool holder is not needed and makes the printer too tall. The filament detector is attached to the spool holder so I needed an alternative detector mount.
I fixed this by designing a component that mounts to the spool holder location and better positions the filament detector for downward-fed filament.
The printed component has an M3 hole on one side to accept the filament holder screw directly and a 4mm hole on the other side to accept an M3 insert. The M3 hole works fine, just be careful not to over-tighten. If you have M3 inserts available, this would be a more professional solution and is easier to take apart and re-assemble.
All original bolts are used to secure the part so no additional fittings are required.
Designed in Fusion 360, using chamfered edges that match the printer design.
Made in PLA+ with 10% infill, 0.15mm layer height.
If you find this useful then please let me know. I would love to see how your Neptune 3 Pro is set up, so please share a make. If you have any questions or suggestions I'll be happy to help.