1 / 4
Prusa Mini/Mini+ 3030-Profile Slot Cover (full length printed @ Mk3) — zdjęcie 1
1 / 4

Prusa Mini/Mini+ 3030-Profile Slot Cover (full length printed @ Mk3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the profile covers created by der-pw, but covering the full length with 1 piece: requires printing on the Mk3

Ocena
5 / 5
Polubienia
16
Pobrania
113
Wydruki
6
Wyświetlenia
842
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The profile slot covers created by der-pw are really nice, however they didn't cover the slots by a single piece. The size of the Mini couldn't create the required lenghts for the covers to cover them in a single piece.

As I have the luxury of a Mk3, i've edited the design of the profiles to the required lengths and created a 3mf-file to cover all sides that is needed. This 3mf-file contains:

  • 1x 287mm: at the front of the Z-axis profile (remove safety sticker)
  • 1x 237mm: at the side of the Z-axis profile (keep prusa S/N sticker)
  • 1x 261mm: at the top of the left Y-axis profile
  • 2x 235mm: at the sides of the Y-axis profiles
  • 1x 152mm+ 78mm: at the top of the right Y-axis profile

Updates will follow of the correct lengths including the additional Z-profile stiffening bracket

Tagi