PSK60 endstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
A compact, enclosed endstop for the Bosch-Rexroth PSK60 linear actuators.
It replaces the factory default aluminum tabs at either end of the actuator and besides being an end-stop, it also a) holds the magnetic strip in place and b) functions as a crumple zone in case of a crash (which I have not tested and don't plan to :) but the theory is the micro-switch position is adjustable such that the carriage first triggers the endstop then stops in the plastic buffer in case of a crash without crashing the microswitch). I have also not attempted to measure repeatability but it seems to perform very well in practice.
Additional parts needed:
- 2x M3x16mm screws and washers to mount the endstop cover
- 2x M2.5 screws and nuts to mount the microswitch.
- standard 20mm microswitch
Print instructions
Unassociated tags: linear actuator
Category: Parts Summary
A compact, enclosed endstop for the Bosch-Rexroth PSK60 linear actuators.
It replaces the factory default aluminum tabs at either end of the actuator and besides being an end-stop, it also a) holds the magnetic strip in place and b) functions as a crumple zone in case of a crash (which I have not tested and don't plan to :) but the theory is the micro-switch position is adjustable such that the carriage first triggers the endstop then stops in the plastic buffer in case of a crash without crashing the microswitch). I have also not attempted to measure repeatability but it seems to perform very well in practice.
Additional parts needed:
- 2x M3x16mm screws and washers to mount the endstop cover
- 2x M2.5 screws and nuts to mount the microswitch.
- standard 20mm microswitch