BlueSCSI 1.1a Macintosh LC Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to mount a BlueSCSI 1.1a in a Macintosh LC-series computer, if your LC is missing the metal bracket.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
If you are missing the metal hard drive bracket for your Macintosh LC-series computer, this bracket mounts your BlueSCSI 1.1a in your vintage Macintosh LC-series computer's hard drive bay.
If you have the stock metal bracket, then my standard Macintosh Hard Drive Bay Bracket is recommended. It takes less time to print, mounts in the metal bracket, and will keep your vintage Macintosh more stock.
While this bracket does use the plastic clips on your Mac to snap into place, it is designed to be gentle on them as the plastic is now old and potentially brittle.
Compatibility
This bracket should be compatible with the Macintosh LC, LCII, LCIII, Performa 465, Performa 476, and Quadra 605.
Required Parts
- BlueSCSI 1.1a Desktop
- Two M2.4 x 5 mm screws
Versions
v1
- Original release
v2
- Some users reported that the clips weren't wide enough
- Made the clips wider, matching the OEM bracket width
- Made the microSD card slot deeper to give more clearance
- Added a slot to give access to the microUSB port for firmware upgrades
v3 (2024-04-01)
- No changes to models
- Removed 1.0 models (they no longer serve a purpose)
- Updated license from non-commercial/no derivatives to a more permissive license
- Uploaded .F3D and .STEP files