Lathe QCTP Dual Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I like the idea of holding the QCTP tools on the lathe itself, but I wanted something to make better use of space and…
- Ocena
- 4 / 5
- Polubienia
- 25
- Pobrania
- 142
- Wydruki
- 1
- Wyświetlenia
- 1292
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I like the idea of holding the QCTP tools on the lathe itself, but I wanted something to make better use of space and to fit my 0xA tool holders. With this design you can seat the tool holders on both sides of the lathe back plate. That means you can fit 8-10 QCTP toolholders on a 7x10 mini lathe.
Note: the dovetail is 3% smaller than the nominal measurement of 0xA such that you can just drop the tools in and the support doesn't come off with a tool because of a too tight fit. If you want something to hold QCTP tools tightly, see my other design "anything on a lathe".
Print instructions
Category: Tool Holders & Boxes Summary
I like the idea of holding the QCTP tools on the lathe itself, but I wanted something to make better use of space and to fit my 0xA tool holders. With this design you can seat the tool holders on both sides of the lathe back plate. That means you can fit 8-10 QCTP toolholders on a 7x10 mini lathe.
Note: the dovetail is 3% smaller than the nominal measurement of 0xA such that you can just drop the tools in and the support doesn't come off with a tool because of a too tight fit. If you want something to hold QCTP tools tightly, see my other design "anything on a lathe".