1 / 1
Qidi I-Mates Z-axis stopper & shock absorber — zdjęcie 1

Qidi I-Mates Z-axis stopper & shock absorber

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simply z-axis bump stopper / shock absorber for the Qidi i-Mates.

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
227
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a simply z-axis bump stopper / shock absorber for the Qidi i-Mates.
Sometimes the built plates just drops down and hits the limit switch bracket.
I wanted to prevent this with some rubber like bumper.

Made out of 3 discs that simply clip onto the bottom of the two Z-Axis rods.
You will need to print two of them. The bumper has a bit of extra play around the Z-Axis rods, to allow it form expanding easily again after being compressed and not get stuck.

I decide to use the Gyroid support as the infill for the flexible areas, this seems to work great in my case as it is stiff enough to jump back into original shape and the z-axis motor is strong enough to compress it to hit the bottom limit switch.

Print in TPU and slowly.
Print Gyroid supports at 8% density.
Recue clearance between support and layers so everything becomes one piece. Support z distance 0.0mm

Tagi