1 / 2
MPCNC Primo Dust Shoe (Makita Router)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust shoe for the MPCNC Primo + Makita Router
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 1243
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (1)Kolekcje (42)Powiązane
I use a Makita RT0700x on my MPCNC.
I wanted a dust shoe that would:
- Maintain the full machine volume
- Allow independent movement of the Z-Axis
- Easily dismount if I changed tool to a drag-knife or pen
The closest thing available on the forums was this: https://forum.v1engineering.com/t/dust-collection-without-shoe-futile/20227/32
I've built heavily on that design, though pretty much every part has been adapted or changed to suit my use case or provide clearance.
This should be modular enough to allow others to build their own dust shoes.
Other Hardware needed:
- M6 Bolts, 20mm (to set shoe height and to affix the lower bracket - threading will be needed)
- M4 Bolt, 45mm to affix the shoe to the vacuum tube.
Printing Notes
- The bristles I print in TPU