Ender 3 Pro Direct Drive Filament Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you Upgraded your Ender 3 Pro to Direct Drive you may want to attach a Filament Guide to your printer. Here's a…
- Ocena
- 5 / 5
- Polubienia
- 124
- Pobrania
- 1109
- Wydruki
- 14
- Wyświetlenia
- 3041
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
If you Upgraded your Ender 3 Pro to Direct Drive you may want to attach a Filament Guide to your printer. Here's a simple solution.
Note: The Hole where the FIlament goes through fits a Ø4mm PTFE Tube. Just put the Tube inside and cut it to your desired length.
There are two versions:
*Tight fit: Fits very tightly to the Aluminium Extrusion, may need a bit of afterwork to properly work, but I recommend this Version.
*Loose fit: Fits loosely to the Aluminium Extrusion, no afterwork is needed if printed properly.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0,18-0,24mm
Infill:
25-30%
Filament: OWL PLA Orange
Category: 3D Printer Accessories