1 / 2
Gas Manifold — zdjęcie 1
1 / 2

Gas Manifold

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gas manifold with 1/4"-18 NPT threads. 4, 6, 8, 10 or 12 way.

Ocena
0 / 5
Polubienia
10
Pobrania
53
Wydruki
0
Wyświetlenia
381
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

This was designed to be printed using PETG with special settings. Please refer to this post on how to be able to print gas tight 3d models using PETG: https://www.printables.com/model/15310-how-to-print-glass

After printing the threads should be chased with a 1/4"-18 NPT tap. About $10 from Amazon. The carbon steel versions will work fine as we are talking plastic. I use isopropyl alcohol for lubrication during chasing.

On assembly use a good plastic thread sealant. Vibra-Tite 481 works. DO NOT USE anything with PTFE in it or PTFE tape, it WILL LEAK!!! 

I use this for various beverage serving purposes at up to 80psi. I find this manifold to be longer lasting than the common aluminum manifolds otherwise available.

Tagi