Typewriter Ribbon Spool for Remington Rand Deluxe No.5 Vintage Typewriter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These ribbon spools are often missing from these typewriters so here is a 3D printable replacement
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 754
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This model comprises two parts that can be printed together. The g_code is from my Creality Ender S1 with default settings. If you want more control slice your own from the two .stl files.
I used standard PLA filament
The two parts will need some fettling with needle files to mate well. The spool core may need reaming with a round needle file to ensure it spins freely on the typewriter spindle.
Unscrew the typewriter spindle and remove the bevel gear. Press that onto the bottom of the spool carefully and then wind on your ribbon before reassembly.
The ribbon can be attached by making a small hole in the ribbon at one end and passing the end through to create a loop. Hold the end with finger and thumb and tighten on the spool with a few loops of ribbon. Then wind the rest of the ribbon.
The ribbon sensor arms on the typewriter may need to be eased upwards with long nosed pliers to ensure they swing freely into the spool.