1 / 3
3/8in female to 1/4in male socket adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3/8in to 1/4in socket adapter that can be used for low torque applications.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a 3/8in to 1/4in socket adapter that can be used for low torque applications.
I printed this with 4 perimeters, 100% infill, and a .2mm layer height to try and make it as strong as possible. However, it can still break if too much torque is applied. I would recommend printing multiple in case you accidentally break one.
The 1/4in side of the model is a bit loose so I used a piece of duct tape to make sure the socket did not fall off.