Flight Case for PC Mouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I wanted to make a small assembly project.... So I made a box for my Mouse of all things.
- Ocena
- 4,833 / 5
- Polubienia
- 98
- Pobrania
- 546
- Wydruki
- 6
- Wyświetlenia
- 5189
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So I wanted to make a small assembly project.... So I made a box for my Mouse of all things.
The Pictures show a Case with logo but there is no logo in the files.
I used M3 threaded inserts and M3 screws for this project.
Button-head screws for everything except for the screw for the locking mechanism. For that I used a countersunk M3.
I believe you can get away with using 8 to 12 mm length for all screws.
If I could remember where I had the screws and inserts from I would post it. But It was something I just had laying around.