1 / 5
Plug Tester Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip to hold your plug tester.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 705
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (15)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (9)Powiązane
This is a clip that perfectly holds an Extech Plug tester/transmitter for CB10.
Once the clip grabs the tester, it won't let go until you push one of the ends/grips back.
These clips can be screw mounted, tied to a pouch, or hang from a pouch.
I made this, so I could carry my plug tester on my ToughBuilt Pouch.
The part was printed in PLA with an infill of 100%.
Notes:
- ‘O’ Stands for Option. They're several different model options you can choose to download.
- ‘HO’ Stands for Hanging Option. These models allow you to hang the clip to your pouch using a key ring or a hook
- Plug Tester Clip O-3.2 has updated tolerances. It's hook is 1mm thinner so it can fit over the ToughBuilt Tape Measure bracket/clip on the ToughBuilt Pouch.
- Plug Tester Clip O-3 is good for hanging it on the fabric of the ToughBuilt Pouch due to it's tighter tolerance.
- Plug Tester Clip O-3.3 tightly fits/locks over the fabric of the ToughBuilt Pouch so it stays in place.