1 / 4
Bambu Lab P1P Pegboard Mount - Filler Filament Holder — zdjęcie 1
1 / 4

Bambu Lab P1P Pegboard Mount - Filler Filament Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple bracket to hold the Filler filament holder on the Bambu Lab P1P Pegboard.

Ocena
5 / 5
Polubienia
59
Pobrania
306
Wydruki
6
Wyświetlenia
3082
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Updated: there are now two version as requested, one with a 4 degree upward angle, and another (original) with 8 degree. I have been using the original 8 degree version without any issues, but some users have reported this was too much tilt for their setup, so now there is a less tilted version.

Printed at 0.2 layer height Standard P1P profile, normal auto supports. 

I welcome any feedback or requested modifications if need be.

Tagi