Polymaker Cardboard Spool Adapter for BambuLab AMS (Update V2.1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Polymaker Cardboard Spool Adapter for BambuLab AMS. Newly UPDATED V2.1!
- Ocena
- 4,88 / 5
- Polubienia
- 210
- Pobrania
- 2807
- Wydruki
- 21
- Wyświetlenia
- 9737
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
UPDATE: Version 2.1 of this spool adapter has been uploaded. Slight correction to V2 on the retention tabs.
This is a Bambu Lab AMS adapted for Polymaker cardboard spools. There is one registration pin to avoid slippage. I honestly do not know if it makes a difference, since I have not tried printing these without the pin.
Update: turns out the 1 pin idea makes this a universal spool adapter. Seems to work on both Polymaker and Overture spools. Curious to know if anyone else agrees.
I have also include small/tiny edge retention clips to lock onto the carboard spool. This is an improvement over my original Overture spool adapter. The enlarged image from the Bambu Studio slicer view shows the small amount of overhang used to create the edge retention clips.
Update: Improved retention clip design.
Also note this is not exactly compatible with PolyTerra spools. The hole offset from the edge on PolyTerra spools is not the same distance. So, I guess you could enlarge the hole a bit to accommodate this discrepancy.
I print these with “concentric” top and bottom surface patterns. I have not tried printing in other patterns.
Printed in PLA and PETG. Both seem to work fine.
Update: I also believe the STEP file prints more accurate the STL. Just my own observation.
I welcome any feedback.
Thanks,
James