LG LBS-700 Headset Holder Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this LG LBS-700 Headset Holder / Wall Mount. Should work with other similarly-sized headsets. Countersunk…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 319
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this LG LBS-700 Headset Holder / Wall Mount. Should work with other similarly-sized headsets. Countersunk tapered hole in center for mounting with 1 drywall screw or similar. Works very well for me.
Print Settings
Printer:
Sindoh 3Dwox
Rafts:
No
Supports:
No
Resolution:
0.2 layer height
Infill:
20% Full Honeycomb
Notes:
I printed in black PLA with the logo side down on the platform. This avoided having to use any supports for the overhang lip and the knock-out logo printed fine on my printer at 0.2 layer height. Use enough infill so that there is decent support around the screw hole. I used 3 top layers, 3 bottom layers, and 3 walls. I don't know why the .STL preview photo is upside down, but don't try to print it that way obviously! :)
Traced outline of headset on paper, measured and designed in my head what I thought would work well, sketched up and extruded in Fusion 360.
Category: Music