Wiha 26190 7-piece Screwdriver Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A similar remix on Thingiverse for a 7-piece Wiha set did not fit my driver set handles properly. My set has (2)…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 434
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A similar remix on Thingiverse for a 7-piece Wiha set did not fit my driver set handles properly. My set has (2) large, (3) medium, and (2) small handles. This build fits that. Also I made screw holes for mounting and made slightly thicker to avoid warping when drivers inserted.
Print Settings
Printer:
Sindoh 3Dwox
Rafts:
No
Supports:
No
Resolution:
0.2 layer height
Infill:
35% Full Honeycomb
Notes:
Printed in Gray PLA
I will probably use 1¼" screws if 1" don't have enough bite after inserting through thicker build.
How I Designed This
Imported another build on Thingiverse (STL) into Fusion 360 and used as a template to project general dimensions onto a plane. Traced over it manually as sketch, removing/changing the driver hex holes as needed to fit my set handles. Extruded and added screw holes.
Category: Tool Holders & Boxes