1 / 1
Replacement squeezer for Krups Orange / Lemon Juicer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you own a Krups Type 250 Citrus Juicer, this replacement head will allow you to continue juicing as you please.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 880
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
You may own a Krups Type 250 juicer for citrus fruit. It is a virtually indestructable kitchen appliance from the 70s. However, parts get lost. If you lost the most important part, the juicer head, this model can replace it.
Please note:
- Due to its application, the model is experiencing quite high shear forces. Print with 50%+ infill and use your strongest infill pattern to reduce the risk of breaking off the head from the axis. I have printed mine in ABS at 60% and it has been fine for two years.
- This will be in direct contact with your food, so use an appropriate filament.
- As citrus fruits are quite acidic, PLA may not be the best material for printing, consider PETG or ABS.