Mazda Miata ND Armrest iPhone X Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your iPhone steady in place and out of the way on top of the car's armrest.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 1269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Keep your iPhone steady in place and out of the way on top of the car's armrest.
Fixing and removing it is easy with a Velcro support, so you won't damage the car with adhesives or holes.
Frame is a bit larger than the iPhone X so it can be still be used if you have a thin cover on the device.
Reference for the Hook and Loop Tape I used to fix the print to the car:
https://www.amazon.com/gp/product/B000078CUB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Print instructions
Don't recommend using PLA as it might deform and warp with heat inside the car.
If possible, print the thin cover part facing down using the textured plate with a flexible material, as it will add an extra layer of padding to the device, and give a nice surface finish to the assembly