Sunlu S2 Stabiliser V4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 4 of a VERY simple stabiliser for the Sunlu S2 Dryer.
- Ocena
- 4,81 / 5
- Polubienia
- 159
- Pobrania
- 800
- Wydruki
- 23
- Wyświetlenia
- 5241
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Without a spool, the Sunlu S2 is very top-heavy and can easily topple over.
This is a very simple stabiliser which is mounted to the case and provides a bit more stability.
It does need longer screws, I used 18mm long which I happened to have.
Version 2 has a thicker base and relief in the middle of the base so might need supports to print
Version 3 has thicker base, and in order to eliminate supports has no relief and instead has 2 shallow 12mm recesses for self adhesive rubber feet.
Version 4 now has a shallow 12mm recess in the centre for an adhesive rubber foot to prevent the legs bending / sagging under the prolonged weight of the spool.
So it now has 3 rubber feet instead of 2.