1 / 7
Fisher & Paykel Vertical Freezer Door Flap clip — zdjęcie 1
1 / 7

Fisher & Paykel Vertical Freezer Door Flap clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement clip I made for the upper door flap on my 213L Fisher & Paykel Vertical Freezer. The original…

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
148
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a replacement clip I made for the upper door flap on my 213L Fisher & Paykel Vertical Freezer.

The original clip was made from injection molded ABS (picture of original included).

Fisher and Paykel part number 855140

This is not an exact replica but fits and works.

Modeled in Fusion 360. Any feedback greatly appreciated.

Print Settings

Printer:

Creality CR-10s

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0.2mm

Infill:

50%


Notes:

I printed this with 3dfillies PLA+, but ABS/PETG would work as well.

I printed sitting as shown in the photos, you can print with supports however they shouldn't be necessary.

Category: Replacement Parts

Tagi