Fully Supported Island Torture Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For dialing in support settings for detailed prints with large sections that "float" in support material.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution
When dialing in settings for printing Tabletop RPG Minifigures on my Prusa Mini+, the most challenging aspect was large features that spend a lot of print time unconnected to the main model, just floating as their own island within the support material. Tight Z-contact settings make for a good print, but supports that are impossible to remove without destroying the model. Loose Z-contact settings cause those islands to wobble free of the support before they can join up with the main model.
So I designed this part to be quick to print without too much material so I could iterate quickly and find the right settings. I ended up putting many on the build plate together and tweaking the settings per-instance. Then by carefully removing and labeling them one at a time, I could evaluate performance and iterate from there. It worked great, and I have minifigure results that I'm extremely happy with!
For those of you with an account, here's the link to the Onshape project (CAD):
https://cad.onshape.com/documents/cc6d3e96bf3b22e470aa30ff/w/b0ca37ce44d287e5bcd2614c/e/62fee10c54cf547410386745
I also threw in the settings I ended up landing on after all was said and done to print minifigs, I hope it's useful!