ZX Spectrum S-Video base plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base plate for the ZX Spectrum S-Video mod
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 509
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
As an alternative to the ZX Spectrum TV modulator, redhawk668 created an S-Video modulator board.
The original construction uses two nuts to keep the modulator board separated from the mainboard. I prefer to use this 3D printed base plate. It gives the modulator board more stability, and is also insulating the pins of the mini DIN connector from the mainboard.
This print was tested with the modulator board Rev. D, but should also work with the other revisions except of Rev. A.
Printing
Just print the plate with materials like PLA or PETG. Do not use metallic filament, for obvious reasons. Supports are not necessary.