Wall-mounted Kindle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Kindle holder for the Kindle Paperwhite.
- Ocena
- 4,167 / 5
- Polubienia
- 26
- Pobrania
- 287
- Wydruki
- 6
- Wyświetlenia
- 1704
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
A simple Kindle holder for the Kindle Paperwhite. Other kindles will likely fit into it as well, but that's the one I took measurements from when I designed it. The buttons and charging port are still accessible on the bottom of the device, so it should work fine for charging as well. I may change the design in the future to allow the Kindle to tilt outwards away from the wall so it's easier to remove, but it works pretty well for now.
I mounted it with a single 3M command strip, and there are no mounting holes in it for screws, but you could probably drill a hole if you really wanted to mount it with a few screws, but an adhesive should be fine.
Print instructions
Unassociated tags: Amazon Kindle, Command Strip, Easy print, easy to print, Kindle Paperwhite, Wall mounted
Category: Organization Summary
A simple Kindle holder for the Kindle Paperwhite. Other kindles will likely fit into it as well, but that's the one I took measurements from when I designed it. The buttons and charging port are still accessible on the bottom of the device, so it should work fine for charging as well. I may change the design in the future to allow the Kindle to tilt outwards away from the wall so it's easier to remove, but it works pretty well for now.
I mounted it with a single 3M command strip, and there are no mounting holes in it for screws, but you could probably drill a hole if you really wanted to mount it with a few screws, but an adhesive should be fine.
Print Settings
Printer: Folger Tech FT-5
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: ~30%