Nintendo Gamecube Logo (In 3D!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was one of the first non-functional things I modeled about 4 years ago, and I figured I should publish it so you…
- Ocena
- 5 / 5
- Polubienia
- 133
- Pobrania
- 752
- Wydruki
- 4
- Wyświetlenia
- 3345
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This was one of the first non-functional things I modeled about 4 years ago, and I figured I should publish it so you can print one off as well! It wasn't ripped from the Gamecube or anything like that; it was just modeled by eye in AutoCAD, so it probably isn't 100% accurate. It's definitely recognizable, though!
Print instructions
Category: Signs & Logos Summary
This was one of the first non-functional things I modeled about 4 years ago, and I figured I should publish it so you can print one off as well! It wasn't ripped from the Gamecube or anything like that; it was just modeled by eye in AutoCAD, so it probably isn't 100% accurate. It's definitely recognizable, though!
Print Settings
Printer: Folger Tech FT-5
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2mm
Infill: 20%
Notes:
Print it out in the orientation the model is already in. Other orientations work, but the one I have will have the least amount of support material for an FDM printer.